Housings and steel bases for the electric flatirons of subheading 8516.40

Stainless steel bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 3.3 liters but not exceeding 4.8 liters (whether or not having a single stainless steel vertically oriented welded handle), the foregoing each having a rolled top edge and welded stainless steel base with four protrusions designed to interlock with a stand food mixer base (provided for in subheading 8509.90.55)

Sausages and similar products, of meat, meat offal, blood or insects; food preparations based on these products:

Bituminous mixtures based on natural asphalt, on natural bitumen, on petroleum bitumen, on mineral tar or on mineral tar pitch (for example, bituminous mastics, cut-backs)

Hydrazine and hydroxylamine and their inorganic salts; other inorganic bases; other metal oxides, hydroxides and peroxides:

Fast color bases

Fast color bases

Fast color bases

Fast color bases

dl-3-(3,4-Di hydroxy phenyl) alanine;N-Ethyl-N-(2-methoxy carbonyl ethyl) aniline;dl-Phenyl ephrine base; and Carbonic acid, methyl ester, diester with 2,2'-(m-tolyl amino) diethanol (Toluidine carbonate)

Fast color bases

Fast color bases and fast color salts

Bis-O-[(4-methylphenyl)methylene]-D- glucitol (Dimethyl benzylidene sorbitol); and Rhodamine 2C base

2-Amino-6-methoxy benzo thiazole; 2-Amino-6-methyl benzo thiazole; 6-Ethoxy-2-benzo thiazo lethiol; 3-Methyl benzo thiazole-2-hydrazone; and Primuline base

Fast color bases and fast color salts

Chemical contraceptive preparations based on hormones, on other products of heading 2937 or on spermicides

Coloring matter of vegetable or animal origin (including dyeing extracts but excluding animal black), whether or not chemically defined; preparations as specified in note 3 to this chapter based on coloring matter of vegetable or animal origin:

Synthetic organic coloring matter, whether or not chemically defined; preparations as specified in note 3 to this chapter based on synthetic organic coloring matter; synthetic organic products of a kind used as fluorescent brightening agents or as luminophores, whether or not chemically defined:

Disperse dyes and preparations based thereon:

Acid dyes, whether or not premetallized, and preparations based thereon; mordant dyes and preparations based thereon:

Basic dyes and preparations based thereon:

Direct dyes and preparations based thereon:

Vat dyes (including those usable in that state as pigments) and preparations based thereon:

Reactive dyes and preparations based thereon:

Pigments and preparations based thereon:

Preparations based on pigment blue 15:3

Preparations based on pigment red 57:1

Preparations based on pigment yellow 12

Carotenoid coloring matters and preparations based thereon

Color lakes; preparations as specified in note 3 to this chapter based on color lakes:

Pigments and preparations based on chromium compounds

Ultramarine and preparations based thereon

Lithopone and other pigments and preparations based on zinc sulfide

Preparations based on iron oxides

Preparations based on zinc oxides

Preparations based on carbon black

Pigments and preparations based on hexacyanoferrates (ferrocyanides and ferricyanides)

Pigments and preparations based on cadmium compounds

Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in a nonaqueous medium; solutions as defined in note 4 to this chapter:

Paints and varnishes (including enamels and lacquers) based on synthetic polymers or chemically modified natural polymers, dispersed or dissolved in an aqueous medium:

Mixtures of odoriferous substances and mixtures (including alcoholic solutions) with a basis of one or more of these substances, of a kind used as raw materials in industry; other preparations based on odoriferous substances, of a kind used for the manufacture of beverages:

Perfume oil mixtures and blends, consisting of products ready for use as finished perfume bases

Perfume oil mixtures and blends, consisting of products ready for use as finished perfume bases

Lubricating preparations (including cutting-oil preparations, bolt or nut release preparations, antirust or anticorrosion preparations and mold release preparations, based on lubricants) and preparations of a kind used for the oil or grease treatment of textile materials, leather, furskins or other materials, but excluding preparations containing, as basic constituents, 70 percent or more by weight of petroleum oils or oils obtained from bituminous minerals:

Dextrins and other modified starches (for example, pregelatinized or esterified starches); glues based on starches, or on dextrins or other modified starches:

Adhesives based on polymers of headings 3901 to 3913 or on rubber:

Artificial graphite; colloidal or semi-colloidal graphite; preparations based on graphite or other carbon in the form of pastes, blocks, plates or other semimanufactures:

Wood tar; wood tar oils; wood creosote; wood naphtha; vegetable pitch; brewers' pitch and similar preparations based on rosin, resin acids or on vegetable pitch

Formulated biocides based on 2-methyl-4-isothiazolin-3-one, or 2-n-octyl-4-isothiazolin-3-one, or 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one, or mixtures of 5-chloro-2-methyl-4- isothiazolin-3-one and 2-methyl-4- isothiazolin-3-one; and Metaldehyde

Ion-exchangers based on polymers of headings 3901 to 3913, in primary forms:

Paper and paperboard of a kind used as a base for photo-sensitive, heat-sensitive or electro-sensitive paper or paperboard:

Wallpaper base (hanging paper)

Sacks and bags, having a base of a width of 40 cm or more

With a base consisting of needleloom felt or non- wovens

Of fabrics formed on a base of paper or covered or lined with paper

Of fabric formed on a base of paper or covered or lined with paper

Made on a base or platform of wood

Made on a base or platform of cork

Footwear made on a base or platform of wood, not having an inner sole or a protective metal toe-cap

Footwear made on a base or platform of wood, not having an inner sole or a protective metal toe-cap

Footwear made on a base or platform of wood, not having an inner sole or a protective metal toe-cap

Footwear made on a base or platform of wood, not having an inner sole or a protective metal toe-cap

Footwear made on a base or platform of wood

Monuments, bases and markers

Monuments, bases and markers

Natural or artificial abrasive powder or grain, on a base of textile material, of paper, of paperboard or of other materials, whether or not cut to shape or sewn or otherwise made up:

On a base of woven textile fabric only

On a base of paper or paperboard only

On a base of other materials:

Articles of plaster or of compositions based on plaster:

Of base metal clad with precious metal:

Of base metal clad with precious metal

Electrolytically coated or plated with base metal

Plated or coated with other base metals:

Copper-zinc base alloys (brass)

Copper-tin base alloys (bronze)

Copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)

Of copper-tin base alloys (bronze)

Of copper-tin base alloys (bronze)

Of copper-zinc base alloys (brass):

Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)

Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)

Bars and rods of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver)

Of copper-zinc base alloys (brass)

Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel silver):

Of copper-nickel base alloys (cupro-nickel) or copper- nickel-zinc base alloys (nickel silver)

Of copper-zinc base alloys (brass)

Of copper-zinc base alloys (brass):

Of copper-nickel base alloys (cupro-nickel) or copper-nickel-zinc base alloys (nickel-silver)

Of copper-zinc base alloys (brass)

Of copper-zinc base alloys (brass)

Handtools of the following kinds and base metal parts thereof: spades, shovels, mattocks, picks, hoes, forks and rakes; axes, bill hooks and similar hewing tools; secateurs and pruners of any kind; scythes, sickles, hay knives, hedge shears, timber wedges and other tools of a kind used in agriculture, horticulture or forestry:

Handsaws, and metal parts thereof; blades for saws of all kinds (including slitting, slotting or toothless saw blades), and base metal parts thereof:

Files, rasps, pliers (including cutting pliers), pincers, tweezers, metal cutting shears, pipe cutters, bolt cutters, perforating punches and similar handtools, and base metal parts thereof:

Hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches); socket wrenches, with or without handles, drives or extensions; base metal parts thereof:

Handtools (including glass cutters) not elsewhere specified or included; blow torches and similar self-contained torches; vises, clamps and the like, other than accessories for and parts of machine tools or water-jet cutting machines; anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; base metal parts thereof:

Anvils; portable forges; hand- or pedal-operated grinding wheels with frameworks; base metal parts thereof

Interchangeable tools for handtools, whether or not power operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools; base metal parts thereof:

Knives and cutting blades, for machines or for mechanical appliances, and base metal parts thereof:

Hand-operated mechanical appliances, weighing 10 kg or less, used in the preparation, conditioning or serving of food or drink, and base metal parts thereof

Knives with cutting blades, serrated or not (including pruning knives), other than knives of heading 8208, and blades and other base metal parts thereof:

Handles of base metal:

Razors and razor blades (including razor blade blanks in strips), and base metal parts thereof:

Scissors, tailors' shears and similar shears, and blades and other base metal parts thereof:

Other articles of cutlery (for example, hair clippers, butchers' or kitchen cleavers, chopping or mincing knives, paper knives); manicure or pedicure sets and instruments (including nail files); base metal parts thereof:

Spoons, forks, ladles, skimmers, cake-servers, fish-knives, butter-knives, sugar tongs and similar kitchen or tableware; and base metal parts thereof:

With base metal (except stainless steel) or nonmetal handles

Padlocks and locks (key, combination or electrically operated), of base metal; clasps and frames with clasps, incorporating locks, of base metal; keys and parts of any of the foregoing articles, of base metal:

Base metal mountings, fittings and similar articles suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, chests, caskets or the like; base metal hat racks, hat-pegs, brackets and similar fixtures; castors with mountings of base metal; automatic door closers of base metal; and base metal parts thereof:

Armored or reinforced safes, strong-boxes and doors and safe deposit lockers for strong-rooms, cash or deed boxes and the like, and parts thereof, of base metal

Desk-top filing or card-index cabinets, paper trays, paper rests, pen trays, office-stamp stands and similar office or desk equipment and parts thereof, of base metal, other than office furniture of heading 9403

Fittings for looseleaf binders or files, letter clips, letter corners, paper clips, indexing tags and similar office articles, and parts thereof, of base metal; staples in strips (for example, for offices, upholstery, packaging), of base metal:

Bells, gongs and the like, nonelectric, of base metal; statuettes and other ornaments, of base metal; photograph, picture or similar frames, of base metal; mirrors of base metal; and base metal parts thereof:

Flexible tubing of base metal, with or without fittings:

Of other base metal:

Clasps, frames with clasps, buckles, buckle-clasps, hooks, eyes, eyelets and the like, of base metal, of a kind used for clothing or clothing accessories, footwear, jewelry, wrist watches, books, awnings, leather goods, travel goods or saddlery or for other made up articles; tubular or bifurcated rivets, of base metal; beads and spangles, of base metal:

Beads and spangles of base metal

Stoppers, caps and lids (including crown corks, screw caps and pouring stoppers), capsules for bottles, threaded bungs, bung covers, seals and other packing accessories, and parts thereof, of base metal:

Sign plates, name plates, address plates and similar plates, numbers, letters and other symbols, and parts thereof, of base metal, excluding those of heading 9405

Wire, rods, tubes, plates, electrodes and similar products of base metal or of metal carbides, coated or cored with flux material, of a kind used for soldering, brazing, welding or deposition of metal or of metal carbides; wire and rods, of agglomerated base metal powder, used for metal spraying; base metal parts thereof:

Coated electrodes of base metal, for electric arc-welding

Cored wire of base metal, for electric arc-welding

Coated rods and cored wire, of base metal, for soldering, brazing or welding by flame:

Chassis, chassis bases and outer cabinets

Machinery (other than machines of heading 8450) for washing, cleaning, wringing, drying, ironing, pressing (including fusing presses), bleaching, dyeing, dressing, finishing, coating or impregnating textile yarns, fabrics or made up textile articles and machines for applying the paste to the base fabric or other support used in the manufacture of floor coverings such as linoleum; machines for reeling, unreeling, folding, cutting or pinking textile fabrics; parts thereof:

Sewing machines, other than book-sewing machines of heading 8440; furniture, bases and covers specially designed for sewing machines; sewing machine needles; parts thereof:

Furniture, bases and covers for sewing machines, and parts thereof; other parts of sewing machines:

Furniture, bases and covers for sewing machines, and parts thereof

Bed, base, table, column, cradle, frame, bolster, crown, slide, rod, tailstock and headstock castings, weldments or fabrications

Bed, base, table, column, cradle, frame, bolster, crown, slide, rod, tailstock and headstock castings, weldments or fabrications

Frame assemblies incorporating more than one of the following: baseplate; side frames; power screws; front plates

Molding boxes for metal foundry; mold bases; molding patterns; molds for metal (other than ingot molds), metal carbides, glass, mineral materials, rubber or plastics:

Mold bases

Housings and steel bases for the electric flatirons of subheading 8516.40

Having a base wholly of impregnated paper

Other, having a ceramic base

Boards, panels, consoles, desks, cabinets and other bases, equipped with two or more apparatus of heading 8535 or 8536, for electric control or the distribution of electricity, including those incorporating instruments or apparatus of chapter 90, and numerical control apparatus, other than switching apparatus of heading 8517:

Boards, panels, consoles, desks, cabinets and other bases for the goods of heading 8537, not equipped with their apparatus

With a single plug-in base

With a single screw-in base

Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating material apart from any minor components of metal (for example, threaded sockets) incorporated during molding solely for the purposes of assembly, other than insulators of heading 8546; electrical conduit tubing and joints therefor, of base metal lined with insulating material:

Dental drill engines, whether or not combined on a single base with other dental equipment, and parts and accessories thereof

Apparatus based on the use of X-rays or of alpha, beta, gamma or other ionizing radiations, whether or not for medical, surgical, dental or veterinary uses, including radiography or radiotherapy apparatus, X-ray tubes and other X-ray generators, high tension generators, control panels and desks, screens, examination or treatment tables, chairs and the like; parts and accessories thereof:

Of apparatus based on the use of X-rays

Of textile material or of base metal, whether or not gold- or silver-plated

Of textile material or of base metal, whether or not gold- or silver-plated

Of textile material or of base metal, whether or not gold- or silver-plated

Of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold-or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold-or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver- plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver- plated

With strap, band or bracelet of textile material or of base metal, whether or not gold- or silver-plated

With strap, band or bracelet of textile material or of base metal, whether or not gold-or silver-plated

Cases of base metal, whether or not gold- or silver-plated:

Of base metal, whether or not gold- or silver-plated:

Mechanically adjustable bed or mattress base, not foldable, having the characteristics of a bed or bed frame, of a width exceeding 91.44 cm, of a length exceeding 184.15 cm, and of a depth exceeding 8.89 cm

Mattress bases with legs, not foldable, having the characteristics of a stationary (not mechanically adjustable) bed frame, of a width exceeding 91.44 cm, of a length exceeding 184.15 cm and of a depth exceeding 8.89 cm

Lampposts and bases for lampposts, of cast iron

Lampposts and bases for lampposts, of aluminum

Of base metal, not covered with textile material

Fitted with chain scoops of base metal

Phosphorescent pigment based on copper-doped zinc sulfide (CAS No. 68611-70-1) (provided for in subheading 3206.42.00)

Resin cement based on calcium carbonate and silicone resins (CAS Nos. 471-34-1 and 68037-83-2) (provided for in subheading 3214.10.00)

Preparations based on N-(2-ethoxyphenyl)-N'-[4-(10-methylundecyl)phenyl] ethanediamide (CAS No. 82493-14-9) (provided for in subheading 3824.99.28)

Mixtures of polymers based on tall oil fatty acids, phthalic anhydride, glycerin and rosin (CAS No. 68015-39-4); poly(isobutyl vinyl ether) (CAS No. 9003-44-5); zinc 2-ethylhexanoate (CAS No. 136-53-8); and more than 50 percent by weight of a hydrocarbon-based solvent (provided for in subheading 3208.10.00)

Water-dispersible polyisocyanate products based on poly(hexamethylene diisocyanate) (CAS No. 28182-81-2) and dimethyldicyclohexylamine compounds with 3-(cyclohexylamino)-1-propanesulfonic acid-poly(1,6-diisocyanatohexane) (CAS No. 666723-27-9) (provided for in subheading 3911.90.90)

Ion-exchange resin, free base form, utilizing a tertiary amine functional group consisting of 2-​propenamide, N-​[3-​(dimethylamino)​propyl]​-​, polymer with diethenylbenzene and 1,​1'-​[oxybis(2,​1-​ethanediyloxy)​]​bis[ethene] (CAS No. 65899-87-8) in spherical beads with a mean particle size between 0.30 and 1.20 mm (provided for in subheading 3914.00.60)

Rectangular plastic block filled with a polymer based freezer gel, designed to attach to reusable food storage containers (provided for in 3926.90.99)

Accessories of plastics for cameras of subheading 8525.80.40, each incorporating a handheld camera grip, folding extension arms and a tripod screwed into the base of the handle the foregoing measuring between 50 and 53 cm when fully extended without the tripod, 62 to 65 cm when fully extended with the tripod and 18 to 21 cm when folded and collapsed (provided for in subheading 3926.90.99).

Camera mounts of plastics, engineered to operate with cameras of subheading 8525.80.40 and facilitate mounting of cameras onto tubes measuring 3.5 to 6.35 cm in diameter, the foregoing incorporating a base capable of rotating the camera 360 degrees on a plane (provided for in subheading 3926.90.99)

Mounting frame enclosures of plastics, designed for digital still image video cameras of subheading 8525.80.40, the foregoing incorporating an adhesive circular base of a diameter of 15 cm (provided for in subheading 3926.90.99)

Camera mounts of plastics, designed to attach cameras of subheading 8525.80.40 securely onto tubes measuring 9 to 35 mm in diameter, each incorporating a base capable of rotating the camera 360 degrees on a plane (provided for in subheading 3926.90.99)

Camera mounts of plastics, each with an elongated, segmented plastic neck composed of 6 to 8 ball joints, incorporating a base that clips into other types of mounts but not incorporating a clamp, engineered to mount cameras of subheading 8525.80.40 (provided for in subheading 3926.90.99).

Camera cases of transparent polycarbonate plastics, designed to encase cameras of subheading 8525.80.40; each incorporating buttons for the operation of the camera, an opaque plastic base that clips into a camera mount, a thumb-screw on the base mount that allows for adjustment of the camera viewing angle on a pivot, a silicon gasket in the door of the case that allows for waterproof operation of the camera at a depth of more than 40 m but not more than 60 m, a flat and optically-coated glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90).

Camera cases with outer surface of transparent molded polycarbonate plastics, designed for cameras of subheading 8525.80.40; the foregoing each incorporating buttons for the operation of the camera, an opaque plastic base that clips into a camera mount, a thumb-screw on the base mount that allows for adjustment of the camera viewing angle on a pivot, a silicon gasket in the door of the case that allows for waterproof operation of the camera at a depth of not more than 40 m, a flat, optically-coated, glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90)

Camera cases of molded polycarbonate plastics, such cases designed to hold cameras of subheading 8525.80.40, each case incorporating buttons for the operation of the camera, a plastic clip attached to a base mount, a thumb-screw on the base mount that allows adjustment of the viewing angle on a pivot, a flat and optically-coated glass lens and open spaces that allow air and sound to enter (provided for in subheading 4202.99.90).

Camera cases designed to contain cameras of subheading 8525.80.40; such cases of opaque molded polycarbonate plastics in a solid color and with nonreflective surface; each incorporating buttons for the operation of the camera, a plastic clip attached to a base mount, a thumb-screw on the base mount designed to facilitate the adjustment of its viewing angle on a pivot, a silicon gasket in the door of the housing designed to allow for waterproof operation of the camera at a depth of more than 40 m but not more than 60 m; each incorporating a flat, optically-coated glass lens and a heat sink to dissipate camera heat (provided for in subheading 4202.99.90).

Flame resistant viscose rayon fibers suitable for yarn spinning, with minimum fiber tenacity of 25 cN/tex, based on modal fiber derived from beechwood and containing 20 to 22 percent by weight of phosphorus-based flame retardant agent (provided for in subheading 5504.10.00)

Batting gloves of man-made fibers, specially designed for use in the sport of baseball, with a strap that wraps around the wrist and the back of the hand to secure the glove to the wrist (provided for in subheading 6216.00.46)

Footwear with outer soles and uppers of rubber or plastics, having uppers of which over 90 percent of the external surface area is rubber or plastics, made on a base or platform of wood (provided for in subheading 6402.99.23)

Footwear for women, with outer soles of rubber or plastics and uppers of leather, made on a base or platform of wood (provided for in subheading 6403.99.20)

Footwear for men, with vulcanized uppers of neoprene measuring 7 mm in thickness, covered with a polyester knit fleece on the interior and coated with rubber on the exterior, such footwear measuring in height (from the base of the inner sole to the top of the upper) 20.32 cm or more but not over 25.4 cm, with a cemented rubber sole; the foregoing waterproof, valued per pair at $40 or higher, with each boot having a slit in the top of upper collar designed to allow boot to be affixed to a fishing wader (provided for in subheading 6404.19.20)

Footwear for men, with vulcanized uppers of neoprene measuring 7 mm in thickness, covered with a polyester knit fleece on the interior and coated with rubber on the exterior; such footwear measuring (from the base of the inner sole to the top of the upper) 20.32 cm or more but not over 25.4 cm in height, with felt outsoles; the foregoing waterproof, valued at $40 per pair or higher and with each boot having with a slit in the top of upper collar to allow boot to be affixed to a fishing wader (provided for in subheading 6405.20.90)

Umbrella frames, not presented with bases, the foregoing with aluminum center support poles of a length greater than 2.133 m, whether or not including a tilt function (provided for in subheading 6603.20.90)

Foliage and flowers of plastics, representing desert or underwater plants and not exceeding 45.72 cm in height, each assembled by gluing and inserted into a base or suction cup, the foregoing presented put up for retail sale as goods designed for a household terrarium or aquarium (provided for in subheading 6702.10.20)

Foliage and flowers of plastics, representing desert or underwater plants, each inserted directly into a base or suction cup, measuring not over 20.32 cm in height, not assembled by gluing or similar means or by binding with flexible materials such as wire, paper, textile materials or foil; the foregoing presented put up for retail sale as goods designed for a household terrarium or aquarium (provided for in subheading 6702.10.40)

Steel bench vises, each weighing less than 9 kg, bolt mounted with a 180 degree swivel base and with reversible jaw faces having a jaw width (opening) measuring between 11 and 12 cm (provided for in subheading 8205.70.00)

Steel bench vises, weighing less than 13.5 kg, bolt mounted with a 180 degree swivel base and reversible jaw faces, having a jaw width (opening) between 13 and 14 cm (provided for in subheading 8205.70.00)

Steel bench vises, each weighing less than 18.75 kg, bolt mounted with a 180 degree swivel base and with reversible jaw faces, having a jaw width (opening) of between 17 and 18 cm (provided for in subheading 8205.70.00)

Rotary or fixed cutter drill bits, each with cutting part of precious or semiprecious stones (natural, synthetic or reconstructed) on a substrate of base metal or metal carbide mounted to a base metal body, the foregoing designed for use with rock drilling and earth boring tools of heading 8430 (provided for in subheading 8207.19.60)

Vacuum insulated coffee servers with liners of steel, each with a capacity over 2 liters, with base but no lid and a hole at bottom of server for lever faucet attachment at time of importation (provided for in subheading 8210.00.00)

Padlocks of base metal, of cylinder or pin tumbler construction, each measuring over 3.8 cm but not over 6.4 cm in width, not put up for retail sale (provided for in subheading 8301.10.80)

Manual door closers of base metal, suitable for use on buildings, such closers with adjustable latch speed tension to suit individual needs; designed with side mount activation button which reduces user damage during activation (provided for in subheading 8302.41.30)

Blower subassemblies, each consisting of an electric A/C or D/C motor with an output wattage over 18.5 W but not exceeding 38.5 W, a metal or plastic blower wheel and a base plate, designed to be incorporated in ceiling fans for permanent installation of subheading 8414.51.30 or in heating units combining a heater, fan and lights for permanent installation, of subheading 8516.29.00 (provided for in subheading 8414.59.65)

Table saws for working wood, cork, bone, hard rubber, hard plastics or similar hard materials, each with blade measuring 25.4 cm (provided for in subheading 8465.91.00), such saws excluding (i) tilting arbor table saws, non-laser guided, each with a 25.4 cm blade and of a weight not exceeding 220 kg, and (ii) laser-guided tilting arbor table saws, each with 25.4 cm blade and detachable base with casters, weighing less than 31 kg

Laser-guided tilting arbor table saws, each with 25.4 cm blade and presented with a detachable base with casters, the foregoing weighing less than 31 kg (provided for in subheading 8465.91.00)

Electromechanical pet toys, each with a plastic butterfly attached to a wire cable that revolves around a plastic base when in use, such toy designed to simulate the flying motion of a butterfly (provided for in subheading 8479.89.94)

Electromechanical cat toys, each depicting a bird in a cage, such toy bird of textile materials with magnet inside its body and suspended by a string from the top of a cage comprising plastic ribs; such cage sitting on a base of plastics that contains the electrical components; with cage base having a magnetic coil designed to switch polarity and cause the bird to be in a state of continuous motion (provided for in subheading 8479.89.94)

Electromechanical cylindrical coffee grinders, each operated by pushing the plastic cover into the base, the foregoing having a removable stainless steel bowl with a capacity of more than 0.1 liter and not exceeding 0.2 liter (provided for in subheading 8509.40.00).

Stainless steel bowls designed for use on electromechanical stand food mixers, each having a capacity greater than 3.3 liters but not exceeding 4.8 liters (whether or not having a single stainless steel vertically oriented welded handle), the foregoing each having a rolled top edge and welded stainless steel base with four protrusions designed to interlock with a stand food mixer base (provided for in subheading 8509.90.55)

Electrothermic steam irons of a kind used for domestic purposes, capable of operating without power cord connected to mains, each with detachable base (provided in subheading 8516.40.40)

Electrothermic siphon coffee brewers of a kind used for domestic purposes, each with upper globe-shaped chamber that seals to bottom carafe magnetically, the foregoing having an electronic control in base (provided for in subheading 8516.71.00)

Electrothermic tea kettles, of a kind used for domestic purposes, each with clear glass chamber, having a stainless steel tea steeper and hinged metal limescale filter, the foregoing having a base containing a temperature control lever (provided for in subheading 8516.71.00)

Electrothermic painted metal dome-shaped kettles, of a kind used for domestic purposes, each with a circular thermometer display and a base containing a temperature control lever and power button (provided for in subheading 8516.79.00)

Baby strollers, each with chassis presented with removable seat and removable bassinet, with the seat designed to be attached to the chassis base plate, with the seat backrest designed to allow a child to be in a reclining position or to be supported at varying backrest angles; the foregoing not including any such stroller with a tilting or tilted seat only (provided for in heading 8715.00.00)

Electric light emitting diode (LED) lighting fittings, of base metal other than of brass, whether ceiling (hanging) or wall mounted, each with LED light source concealed above a quartz cylinder and designed to create a total internal reflection (provided for in subheading 9405.10.60)

Electric table or desk light-emitting diode (LED) task lamps, of base metal other than of brass, each with interchangeable mounting options including bases, clamps or other mounts (provided for in subheading 9405.20.60)

Electric table or desk light-emitting diode (LED) task lamps, of base metal other than of brass, each with ball joints to allow multiple positions of the lamp head relative to the base (provided for in subheading 9405.20.60)

Electric table or desk light-emitting diode (LED) task lamps, of base metal other than of brass, each incorporating a reflector designed to reflect light from the LED in the stem of the lamp (provided for in subheading 9405.20.60)

Light emitting diode (LED) motion-activated security lantern kits, of a kind used for exterior lighting, such lanterns of base metal and having antique bronze finish, each with frosted glass, with an integrated photocell and motion sensor, and with a wall mounting bracket (provided for in subheading 9405.40.60)

Emergency lights, of base metal other than of brass, round or elongated in shape, measuring between 6 and 12 cm in height, each containing incandescent lamp, lamp holder, reflector, clear glass lens with drain hole, pressure can and electrical pigtail with connector; the foregoing configured to be mounted to the exterior of an aircraft and designed for illuminating egress paths on or around the aircraft during an emergency evacuation (provided for in subheading 9405.40.60)

Exterior lights, of base metal other than of brass, such lights round in shape, with a height of 11.5 cm or more but not over 12 cm and a weight not over 1.3 kg, each containing a halogen lamp, lamp holder, reflector, autotransformer and electrical connector, the foregoing configured to be mounted to the exterior of an aircraft and designed for illuminating the top surface, leading edge and engine nacelle areas of the aircraft wings for wing icing detection (provided for in subheading 9405.40.60)

Fitness equipment, with pivoting handles and foot pedals that perform alternating movements which combine the motions of a stepper and an elliptical machine, driving simultaneously a radial fan and magnetic brake in the base, equipped with an electronic control console incapable of the wireless exchange of data, with non-backlit LCD display and presented with a heart-rate monitor chest strap (provided for in subheading 9506.91.00)

Fitness equipment, with pivoting handles and foot pedals that perform alternating movements which combine the motions of a stepper and an elliptical machine, driving simultaneously a radial fan and magnetic brake in the base, equipped with an electronic control console capable of the wireless exchange of data, with backlit LCD display and heart rate monitor (provided for in subheading 9506.91.00)

Adjustable-weight fitness dumbbells, each ranging from 2 kg to not more than 30 kg, having the capability for wireless exchange of data, incorporating a rotating single handle grip that interlocks disks with weight plates supported by a fitted plastic base, whether or not presented packaged with units that are not capable of wireless exchange of data (provided for in subheading 9506.91.00).

Adjustable-weight fitness dumbbells without Bluetooth capability, each ranging from 2 kg to not more than 30 kg, certified by the importer as incorporating a rotating single handle grip that interlocks disks with weight plates, supported by a fitted plastic base (provided for in subheading 9506.91.00)

Fitness equipment, each unit with pivoting handles and foot pedals with steel footbeds to allow the user to perform alternating movements (whether or not also with stationary handles), combining the motions of a stepper and an elliptical machine, and driving simultaneously a radial fan and magnetic brake in the base; with an electronic control console having a backlit liquid crystal display/light-emitting diode (LCD/LED) display and capable of the wireless exchange of data; having an integrated heart rate monitor with optional chest strap (provided for in subheading 9506.91.00)

Adjustable-weight fitness dumbbells, each allowing the user to choose a weight from a range of either 2 kg or more but not over 26 kg or 4 kg or more but not over 46 kg, certified by the importer as incorporating rotating end dials that interlock disks with weight plates supported by a fitted plastic base (provided for in subheading 9506.91.00)

Coffee servers, each with exterior of stainless steel, vacuum glass liner, a hinged brew-through lid with top lever style pump and swivel base; the foregoing with capacity over 2 liters (provided for in subheading 9617.00.40)

Pigments and preparations based on titanium dioxide (provided for in subheading 3206.11.00 or 3206.19.00)

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

Sheep meat, provided for in subheadings 0204.21.00, 0204.22.40, 0204.23.40, 0204.41.00, 0204.42.40 or 0204.43.40, if entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture

If entered during the effective period of safeguards based upon quantity announced by the Secretary of Agriculture